|
Step Treads
Ablatio can supply step treads in a
rough cut finish, i.e. cut on the quarry floor with the excavator
saw or we can cut a tread with a smooth finish on all sides excluding
the back which is covered by the front of the next step.
The size of the step treads is the standard height
of 180mm by 400mm deep and the length ranges from 1m, 1.2m, 1.5m
and 2m. Other
sizes on request.
It is recommended
to use 1m or 1.2m as transporting 1.5m and 2m is more difficult
and requires extra packaging and therefore
extra cost.
|